Dial and Punch Wadding Machine
The machine will be capable of inserting and fixing the wads into the caps. The caps will be loaded into a Vibratory hopper or Elevator Hopper manually. The feeder supplies the caps adequately as required to the machine in the oriented fashion. The conveyor transfers the cap to a dial where the caps are indexed at predefined locations. The wads are loaded into a column chute (if in rolls) or into a vibratory feeder (if loose packed liners, normally for EPE or Foam liners) which is placed above the dial, just before the wad punching station. The Liner drops on the top portion of the dial. When the cap and the wad moves to the next station a pusher pushes the wad into the cap and is firmly fixedThe assembled cap will be counted and will exit from the coveyor. The machine will be capable of handling various types and sizes of caps and wads with the help of change parts.
- Available with or without Hot Gluing System
- Speeds Available – 60 Caps per minute
- Suitable for use with Two piece or One piece Liners and EPE liners
Central Building No. 2, 1st Floor, Opp Kalbadevi HPO, Mumbai, Maharashtra, 400002, India